Router Bits

Filter By Category

Custom Popularity
TR40D x 1/2 TCT Two Flute Cutter Long Shank 15 x 25mm

TR40D x 1/2 TCT Two Flute Cutter Long Shank 15 x 25mm

Code: TRETR40D12TC
£36.30 Ex VAT
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungste...
View Details
Kitchen Fitters Pack (5x TR17) TR/KPF/3

Kitchen Fitters Pack (5x TR17) TR/KPF/3

Code: TRETRKFP3
£127.03 Ex VAT
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungste...
View Details
10/11 x 1/2 TCT V-Groove Chamfer 45° 19.0 x 38mm

10/11 x 1/2 TCT V-Groove Chamfer 45° 19.0 x 38mm

Code: TRE101112TC
£70.85 Ex VAT
These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce var...
View Details
10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm

10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm

Code: TRE10H114TC
£59.10 Ex VAT
These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics.Tools are offered to produce various angles for chamfering...
View Details
11/3 x 1/2 TCT V-Groove Cutter 45° 9.2 x 19.1mm

11/3 x 1/2 TCT V-Groove Cutter 45° 9.2 x 19.1mm

Code: TRE11312TC
£40.96 Ex VAT
Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade ap...
View Details
11/3 x 1/4 TCT V-Groove Cutter 45° 9.2 x 19.1mm

11/3 x 1/4 TCT V-Groove Cutter 45° 9.2 x 19.1mm

Code: TRE11314TC
£40.96 Ex VAT
Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade ap...
View Details
11/5 x 1/4 TCT V-Groove Cutter 60° 10.3 x 12.7mm

11/5 x 1/4 TCT V-Groove Cutter 60° 10.3 x 12.7mm

Code: TRE11514TC
£38.19 Ex VAT
Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade ap...
View Details
12/3 x 1/4 TCT Radius Cutter 3.0mm Radius

12/3 x 1/4 TCT Radius Cutter 3.0mm Radius

Code: TRE12314TC
£44.17 Ex VAT
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surroun...
View Details
13/30 x 1/2 TCT Radius Cutter 12.7mm Radius

13/30 x 1/2 TCT Radius Cutter 12.7mm Radius

Code: TRE133012TC
£86.24 Ex VAT
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surroun...
View Details
13/3 x 1/4 TCT Radius Cutter 10.0mm Radius

13/3 x 1/4 TCT Radius Cutter 10.0mm Radius

Code: TRE13314TC
£79.85 Ex VAT
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surroun...
View Details
2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm

2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm

Code: TRE20114TC
£31.79 Ex VAT
These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute...
View Details
24/10 x 1/4 TCT Plug Maker No.10

24/10 x 1/4 TCT Plug Maker No.10

Code: TRE241014TC
£68.07 Ex VAT
These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min.TC1/4in Shank. Plug De...
View Details