Router Bits

Filter By Category

11/3 x 1/4 TCT V-Groove Cutter 45° 9.2 x 19.1mm

11/3 x 1/4 TCT V-Groove Cutter 45° 9.2 x 19.1mm

Code: TRE11314TC
£41.98 Ex VAT
Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade ap...
View Details
24/10 x 1/4 TCT Plug Maker No.10

24/10 x 1/4 TCT Plug Maker No.10

Code: TRE241014TC
£69.77 Ex VAT
These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min.TC1/4in Shank. Plug De...
View Details
3/10 x 1/4 TCT Two Flute Cutter 3.2 x 11mm

3/10 x 1/4 TCT Two Flute Cutter 3.2 x 11mm

Code: TRE31014TC
£29.77 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm

3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm

Code: TRE3114TC
£34.52 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm

3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm

Code: TRE32014TC
£31.71 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

Code: TRE32114HS
£20.55 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm

3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm

Code: TRE32212TC
£51.21 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm

337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm

Code: TRE33712TC
£113.59 Ex VAT
A one-piece tongue and groove set. The parts are inter-changed on the arbor to alter the set up. Maximum timber thickness 22 mm. Minimum timber thickness 15 mm. Instruction...
View Details
3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm

3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm

Code: TRE3414TC
£36.33 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/50 x 1/4 TCT Two Flute Cutter 9.5 x 25mm

3/50 x 1/4 TCT Two Flute Cutter 9.5 x 25mm

Code: TRE35014TC
£39.14 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/5 x 1/4 TCT Two Flute Cutter 9.0 x 19mm

3/5 x 1/4 TCT Two Flute Cutter 9.0 x 19mm

Code: TRE3514TC
£36.33 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/60 x 1/2 TCT Two Flute Cutter 10.0 x 35mm

3/60 x 1/2 TCT Two Flute Cutter 10.0 x 35mm

Code: TRE36012TC
£55.82 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details