Router Bits

Filter By Category

TR30 x 1/2 TCT Shank Mounted Bearing Guided Profiler 19.1 x 50mm

TR30 x 1/2 TCT Shank Mounted Bearing Guided Profiler 19.1 x 50mm

Code: TRETR3012TC
£71.76 Ex VAT
Trend TR30 Trade Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2mm micrograin tungsten carbide tips, fo...
View Details
TR40D x 1/2 TCT Two Flute Cutter Long Shank 15 x 25mm

TR40D x 1/2 TCT Two Flute Cutter Long Shank 15 x 25mm

Code: TRETR40D12TC
£37.21 Ex VAT
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungste...
View Details
10/11 x 1/2 TCT V-Groove Chamfer 45° 19.0 x 38mm

10/11 x 1/2 TCT V-Groove Chamfer 45° 19.0 x 38mm

Code: TRE101112TC
£72.62 Ex VAT
These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce var...
View Details
10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm

10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm

Code: TRE10H114TC
£60.58 Ex VAT
These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics.Tools are offered to produce various angles for chamfering...
View Details
11/3 x 1/2 TCT V-Groove Cutter 45° 9.2 x 19.1mm

11/3 x 1/2 TCT V-Groove Cutter 45° 9.2 x 19.1mm

Code: TRE11312TC
£41.98 Ex VAT
Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade ap...
View Details
11/3 x 1/4 TCT V-Groove Cutter 45° 9.2 x 19.1mm

11/3 x 1/4 TCT V-Groove Cutter 45° 9.2 x 19.1mm

Code: TRE11314TC
£41.98 Ex VAT
Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade ap...
View Details
24/10 x 1/4 TCT Plug Maker No.10

24/10 x 1/4 TCT Plug Maker No.10

Code: TRE241014TC
£69.77 Ex VAT
These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min.TC1/4in Shank. Plug De...
View Details
3/10 x 1/4 TCT Two Flute Cutter 3.2 x 11mm

3/10 x 1/4 TCT Two Flute Cutter 3.2 x 11mm

Code: TRE31014TC
£29.77 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm

3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm

Code: TRE3114TC
£34.52 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm

3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm

Code: TRE32014TC
£31.71 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

Code: TRE32114HS
£20.55 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm

3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm

Code: TRE32212TC
£51.21 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details