Router Bits

Filter By Category

Custom Popularity
3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm

3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm

Code: TRE3114TC
£32.70 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm

3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm

Code: TRE32014TC
£30.04 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/20L x 1/4 TCT Two Flute Pocket Cutter 6.3 x 16mm

3/20L x 1/4 TCT Two Flute Pocket Cutter 6.3 x 16mm

Code: TRE320L14TC
£40.62 Ex VAT
Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts dept...
View Details
3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

Code: TRE32114HS
£19.47 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/2 x 1/2 TCT Two Flute Cutter 6.0 x 16mm

3/2 x 1/2 TCT Two Flute Cutter 6.0 x 16mm

Code: TRE3212TC
£38.74 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm

3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm

Code: TRE32212TC
£48.50 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/22 x 1/4 TCT Two Flute Cutter 6.3 x 25mm

3/22 x 1/4 TCT Two Flute Cutter 6.3 x 25mm

Code: TRE32214TC
£33.57 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
334 x 1/2 TCT Aquamac Recessor

334 x 1/2 TCT Aquamac Recessor

Code: TRE33412TC
£121.01 Ex VAT
Ref 334 recessing cutter will accomodate the Schlegal Aquamac 21 seal. This cutter is designed for use with the Aquamac seal in a wiping mode and comes complete with a guide...
View Details
Arbor Standard Duty 33/60 x 1/4

Arbor Standard Duty 33/60 x 1/4

Code: TRE336014
£21.66 Ex VAT
For use with Trend bearings and slotters. 1/4in shank. Includes: 1 x Arbor1 x Spacer 5mm3 x Spacer 3mm
View Details
337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm

337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm

Code: TRE33712TC
£107.59 Ex VAT
A one-piece tongue and groove set. The parts are inter-changed on the arbor to alter the set up. Maximum timber thickness 22 mm. Minimum timber thickness 15 mm. Instruction...
View Details
3/4 x 1/2 TCT Two Flute Cutter 8.0 x 19mm

3/4 x 1/2 TCT Two Flute Cutter 8.0 x 19mm

Code: TRE3412TC
£37.91 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details
3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm

3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm

Code: TRE3414TC
£34.41 Ex VAT
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide toolin...
View Details