The Sartra® Fusion 26 Strimmer Head is a tap feed strimmer head for a wide range of Stihl strimmers and brushcutters. It loads in 60 seconds, cuts low to the ground and has an anti-vibration design. It comes with an M10 x 1.0 left-hand adaptor bolt already mounted, so it’s ready to fit. Loads in 60 Seconds. The head is quick and simple to reload, so you spend less time stopped and more time cutting. Tap to Feed. Tap the head on the ground while it’s running to release more line. You don’t need to stop and pull out line by hand. Spinning Metal Knob. The metal knob at the bottom of the head spins as it touches the ground. This reduces friction, so the head wears less when you tap it or work close to the ground. Low Cutting Height. The head is designed to cut close to the ground, which gives a neater finish along edges and on short grass. Less Vibration. The anti-vibration design reduces the vibration that reaches your hands and arms, which means less fatigue over a long day of strimming. Mounted Adaptor Bolt. The head comes with an M10 x 1.0 left-hand female adaptor bolt already fitted. Compatible Models. Stihl FS 55, FS 55 R, FS 56, FS 56 R, FS 56 C-E Stihl FS 70 C-E, FS 70 RC-E, FS 89, FS 91 Stihl FS 94 C-E, FS 94 RC-E, FS 111, FS 131, FS 240 C-E Stihl FSA 90, FSA 90 R, FSA 130, FSA 130 R Stihl FR 131 T, FR 460 TC-EM Check your machine’s model number before ordering. Compatible Razorline Strimmer Line. The head takes Sartra® Razorline strimmer cord in these sizes. Round 2.4mm (2357), 2.7mm (2681) and 3.0mm (2358) Square 2.4mm (2361), 2.7mm (2371), 3.0mm (2362) and 3.3mm (2372) Work Safely. Always stop the engine and wait for the head to stop turning before you adjust or reload the line. On battery machines, remove the battery first. Wear eye protection, hearing protection, gloves and leg protection when strimming.